top of page

GM-501EPS
SELF-PROPELLED CENTER LINE MARKER (LPG Engine)

前斜め(鈴与マーク消し)のコピー.png

Automatic hydraulic engine system
Easy application to an upward slope on a downhill road. Stable application with a free by HST unit.

 Smooth and operative application
Adjust forward, reverse, stop and speed by only one lever action.

 

Low vibration, noise and high efficient engine
No influence to the line width from vibration. Adoption of a 4-stroke OHV engine using LPG which is different from the conventional engine type, safer and more convenient.

 

Machine of a compact size
Almost same size with the hand type application machine.

Exchange of the material tank
Quick exchange allows easy change of color.

About the machine.

GM-501EPS 02.png

Comfortable start-up and highly flexible and fine speed adjustment. Stable speed can be maintained even when climbing uphill or downhill. Contributes to increased work efficiency and reduces the burden on the operator.

Near wheel lock brakes

GM-501EPS 02.png

Parking brake to prevent driving off on slopes (optional).

Flexible bead nozzle bracket

GM-501EPS 02.png

Adjustment of the bead spreading position can be helpful (optional).

Headlamp(LED)

GM-501EPS 02.png

Highly efficient, power-saving and long-life LED lamps are used to illuminate the front of the vehicle very brightly.

Hand-operated guide bar

GM-501EPS 02.png

Guide bar can be easily operated up and down at hand (optional).

Category
SPEC
Length
1290 mm
Width
850 mm (when fitted with 15cm wide applicator)
Height
1070 mm
Weight
225 kg (when fitted with 15cm wide applicator)
Engine type
HONDA Air cooled 4-stroke LPG engine
Engine spec.
OHV 163 cc Max. Output 4.4 PS
Fuel
LPG
Driven application
Hydraulic speed trnansmission (HST)
Speed
Forward for 0 - 4 Km/h , Reverse 0 - 2 Km/h
Upward slope
Max. 15 degrees (26.8%)
LPG cylinder
10 kg (or 15kg)
Material
Thermoplastic hot-applied paint
Application
Extrusion Die
Material tank capacity
66 liter (120kg)
Glass beads box capacity
7.7 liter (10kg)
Applicable line width
4", 8", 10" and 12".

GM-EY20

CENTER LINE MARKER

Exchange of the material tank. Quick exchange allows easy change of color.

With a simple action, the rear wheel can be locked for marking a straight line, and can be unlocked
for universal movement that facilitates marking a curved line or various figures on the road.

The marker is also fitted with an automatic glass beads distribution device, which provides ideal
distribution of glass beads on the freshly laid thermoplastic road lines.

The line width can be changed easily by exchanging the line applicator for the appropriate one with
the designated line width.

Heavy-duty steel applicator with jet burners to apply lines and retain heat.

About the machine

GM-501EPS 02.png

The weight balance between the main unit and the slitter is properly maintained, providing excellent manoeuvrability during installation.

Quick lever

GM-501EPS 02.png

The slitter boom can now be easily adjusted using the quick lever.

Fire power adjustment dial

GM-501EPS 02.png

The adjustment dials have been integrated into the handwheel, making them even easier to use.

Rear wheel locking brake

GM-501EPS 02.png

Parking brake to prevent running off on slopes.

Category
Spec
Length
1205 mm
Width
760 mm (when fitted with 10cm wide applicator)
Height
980 mm
Weight
125 kg (when fitted with 10cm wide applicator)
LPG cylinder
10 kg (or 15kg)
Material
Thermoplastic hot-applied paint
Application
Extrusion Die
Material tank capacity
55 liter (100kg)
Glass beads box capacity
7.7 liter (10kg)
Applicable line width
4", 8", 10" and 12".

GM-450SR,GM-400SR,GM-300SR

ZEBRA MARKER (for Crosswalk line)

450SR 右側面.png

Small size and the handling is easy.

It is possible marking until limit the curb, because the thickness of the beads dispenser is thin.

The slit box is assembled with the parts that used the special material that did the heat treatment by advanced technology. Therefore, the finish of the line is very good.

It is possible the repair quickly with the parts exchange.

About the machine.

GM-501EPS 02.png

Main unit construction suitable for constructing pedestrian crossings and stop lines, enabling lines to be started from the edge of the road or in between, against road kerbs and other obstacles.

Simple, easy-to-operate pedals

GM-501EPS 02.png

The main body of the installation machine is placed on the road surface during installation.

Large capacity bead tank

GM-501EPS 02.png

The glass bead tank has a large capacity to meet construction needs.

Gas burner for heat insulation

GM-501EPS 02.png

The molten paint material inside the machine is kept warm to optimise the paint condition.

Category
GM-450SR
GM-400SR
GM-300SR
Length
1230 mm
1230 mm
1030 mm
Width
770 mm
720 mm
620 mm
Heigh
1000 mm
1000 mm
1000 mm
Weight
118 kg
110 kg
102 kg
LPG cylinder
10 kg
10 kg
10 kg
Material tank capacity
68 kg
60 kg
45 kg
Glass beads box capacity
7 kg
4.3 kg
4.5 kg
Applicable line width
18in.
16in.
12in.

GP-30HDS

PORTABLE AIRLESS PAINT STRIPER

H30DSカタログ表紙.png

Because the large aperture nozzle can be used in spite of the suction type pump, high speed work and wide width line(45cm) are enabled.

Stability of line width is very excellent by the large volume accumulator and the return valve with original bypass nozzle.

All the wheels are pneumatic tire for smooth operation and stability.

With a simple action, the rear wheel can be locked for marking a straight line, and can be unlocked for universal movement that facilitates marking a curved line or various figures on the road.

A hot paint is able to use by adding the heat circuit and making heat keep structure. (Option)

About the machine

GM-501EPS 02.png

Equipped with a large high-pressure chamber and our unique return circuit, a good quality, clean line with no width fluctuations can be installed from the start of spraying.

High-pressure pneumatic tyres

GM-501EPS 02.png

Improved stability by reducing impact due to road conditions and external forces while driving.

Powerful high-capacity pump

GM-501EPS 02.png

Despite being a suction system, high-speed construction and wide line construction with large-diameter nozzles (max. 45 cm) are possible according to the construction application.

Hot paint available

GM-501EPS 02.png

The addition of a customisable optional heat circuit provides the structure with heating and heat retention functions, enabling the use of hot paint.

Category
Spec
Length
1145 mm
Width
805 mm
Height
865 mm
Weight
100 kg
Engine type
Air cooled 4-stroke gasoline Max.Outout 3.5 HP
Pump
Diaphragm Airless/ Max. 7.2 liter/min. / Max. 14 Mp
Glass beads box capacity
11 kg
Applicable line width
2" to 18".

GLC-20HD

LINE ERASER

Outstanding durability of grinding cutter assembly composed of ultra-hard alloys.

Doubled erasing capacity by minimizing frequent, troublesome replacement of grinding cutters.

Smooth operation with easy, simple handling.

IMG_3483.png

Latest model in pursuit of the best road surface finish

GM-501EPS 02.png

Cutter height adjustment function on the back of the main unit to prevent over cutting, taking into account damage to the road surface.

Improved engine performance.

GM-501EPS 02.png

The HONDA GXV390 is used, with technology optimised for heavy-duty work and improved erasing capacity.

Adjustable tilt lever

GM-501EPS 02.png

The adjustable tilt lever allows the grip position to be changed to suit the operator's body shape.

Body structure that is easy to swing

GM-501EPS 02.png

The machine body can be swung easily to the left or right, allowing even wide marking lines to be erased cleanly.

Category
Spec
Length
1130 mm
Width
520 mm
Height
1100 mm
Weight
193 kg
Engine type
HONDA Air cooled 4-stroke gasoline Max.Outout 11.0HP
Cutter Head
Tungsten Carbide or Hardened Steel
bottom of page